In a number of recent articles, where I've interviewed some of social media's rising stars such as Jason Stone from Millionaire Mentor, Sean Perelstein, who built StingHD into a global brand and Nathan Chan from Foundr Magazine, amongst several others, it's quite clear that multi-million-dollar businesses can be built on the backs of wildly-popular social media channels and platforms.
Backscattered electrons (BSE) consist of high-energy electrons originating in the electron beam, that are reflected or back-scattered out of the specimen interaction volume by elastic scattering interactions with specimen atoms. Since heavy elements (high atomic number) backscatter electrons more strongly than light elements (low atomic number), and thus appear brighter in the image, BSEs are used to detect contrast between areas with different chemical compositions.[14] The Everhart-Thornley detector, which is normally positioned to one side of the specimen, is inefficient for the detection of backscattered electrons because few such electrons are emitted in the solid angle subtended by the detector, and because the positively biased detection grid has little ability to attract the higher energy BSE. Dedicated backscattered electron detectors are positioned above the sample in a "doughnut" type arrangement, concentric with the electron beam, maximizing the solid angle of collection. BSE detectors are usually either of scintillator or of semiconductor types. When all parts of the detector are used to collect electrons symmetrically about the beam, atomic number contrast is produced. However, strong topographic contrast is produced by collecting back-scattered electrons from one side above the specimen using an asymmetrical, directional BSE detector; the resulting contrast appears as illumination of the topography from that side. Semiconductor detectors can be made in radial segments that can be switched in or out to control the type of contrast produced and its directionality.
Advertiser Disclosure: Some of the products that appear on this site are from companies from which QuinStreet receives compensation. This compensation may impact how and where products appear on this site including, for example, the order in which they appear. QuinStreet does not include all companies or all types of products available in the marketplace.
Synthetic replicas can be made to avoid the use of original samples when they are not suitable or available for SEM examination due to methodological obstacles or legal issues. This technique is achieved in two steps: (1) a mold of the original surface is made using a silicone-based dental elastomer, and (2) a replica of the original surface is obtained by pouring a synthetic resin into the mold.[18]
Consider how well you know your industry. If you have been in business for a while and already know what your customers want and how to best reach them, you may want to start to build a long-term SEO strategy that will provide value over time. If you aren’t sure how customers and competitors will respond to your offerings or content, you may want to consider an SEM campaign that allows you to test your ideas, products, and services. Use these sites for market research to better understand your target audience and your position in the industry.
Cross-platform measurement: The number of marketing channels continues to expand, as measurement practices are growing in complexity. A cross-platform view must be used to unify audience measurement and media planning. Market researchers need to understand how the Omni-channel affects consumer's behaviour, although when advertisements are on a consumer's device this does not get measured. Significant aspects to cross-platform measurement involves de-duplication and understanding that you have reached an incremental level with another platform, rather than delivering more impressions against people that have previously been reached (Whiteside, 2016).[42] An example is ‘ESPN and comScore partnered on Project Blueprint discovering the sports broadcaster achieved a 21% increase in unduplicated daily reach thanks to digital advertising’ (Whiteside, 2016).[42] Television and radio industries are the electronic media, which competes with digital and other technological advertising. Yet television advertising is not directly competing with online digital advertising due to being able to cross platform with digital technology. Radio also gains power through cross platforms, in online streaming content. Television and radio continue to persuade and affect the audience, across multiple platforms (Fill, Hughes, & De Franceso, 2013).[45] https://m.youtube.com/v/e29F5n3ea0I
Native on-platform analytics, including Facebook’s Insights, Twitter’s Analytics, and Instagram’s Insights. These platforms can help you evaluate your on-platform metrics such as likes, shares, retweets, comments, and direct messages. With this information, you can evaluate the effectiveness of your community-building efforts and your audience’s interest in your content.
People have more options than ever on where they’re starting their research, both in the traditional website sense (i.e., Google, Amazon, Pinterest, Facebook, Next Door, Trivago, Houzz), but also in new ways with voice search on Siri, Alexa, or Google Home. Tactically, of course, everything is different, but that’s the case with all marketing: the “how” will constantly evolve.
A video illustrating a typical practical magnification range of a scanning electron microscope designed for biological specimens. The video starts at 25x, about 6 mm across the whole field of view, and zooms in to 12000×, about 12 μm across the whole field of view. The spherical objects are glass beads with a diameter of 10 μm, similar in diameter to a red blood cell.
2. The content quality is very important, but the production quality is not that important. Production quality and technical aspects have to be OK but not world class. Better production quality is correlated with more trust, but it can’t make up for the lack of substance. So, Facebook Live videos, webinar recordings, and other video material with good enough production quality will work as long as the content itself is engaging.

Finally, consider adding intro and outro music. Intro and outro music, or bookends, can serve as a theme for your content. These are a great choice if you don’t need music throughout your entire video. Bookend music can help set the tone for your video, naturally split your content into chapters, and leave your viewers feeling they had a complete experience.

For any "attract" video, avoid speaking too much about your product. Instead, let your brand values and personality be your north star(s). Finally, because these videos can live on a variety of channels, keep in mind the strategies of each platform. For example, a Facebook video might have a square aspect ratio and text animations for soundless viewers.  http://www.youtube.com/watch?feature=youtube.be&v=7bNPg8UbhaE
Entertainment — The Internet is a plethora of things to do. Some are looking for videos. Others are looking for games. Many are entertained by new stories. Others like financial calculators. Others want to learn something new. Think about what kind of entertainment your target is looking for. Relate it back to your brand. That’s a great way to use SEM to connect.
Online reviews have become one of the most important components in purchasing decisions by consumers in North America. According to a survey conducted by Dimensional Research which included over 1000 participants, 90% of respondents said that positive online reviews influenced their buying decisions and 94% will use a business with at least four stars. Interestingly, negative reviews typically came from online review sites whereas Facebook was the main source of positive reviews. Forrester Research predicts that by 2020, 42% of in-store sales will be from customers who are influenced by web product research.
In March 2006, KinderStart filed a lawsuit against Google over search engine rankings. KinderStart's website was removed from Google's index prior to the lawsuit and the amount of traffic to the site dropped by 70%. On March 16, 2007 the United States District Court for the Northern District of California (San Jose Division) dismissed KinderStart's complaint without leave to amend, and partially granted Google's motion for Rule 11 sanctions against KinderStart's attorney, requiring him to pay part of Google's legal expenses.[68][69]
NetMarketShare claims that as of 2017 Google grabbed more than 79% of search traffic globally, with the other main search engines lagging behind at 7% or less each. Thus, the main focus when we talk about search engines in the context of SEO is Google, but we still need to remember that others Bing, Baidu and Yahoo are still in the running (but barely)
The most common imaging mode collects low-energy (<50 eV) secondary electrons that are ejected from the k-shell of the specimen atoms by inelastic scattering interactions with beam electrons. Due to their low energy, these electrons originate within a few nanometers from the sample surface.[14] The electrons are detected by an Everhart-Thornley detector,[29] which is a type of scintillator-photomultiplier system. The secondary electrons are first collected by attracting them towards an electrically biased grid at about +400 V, and then further accelerated towards a phosphor or scintillator positively biased to about +2,000 V. The accelerated secondary electrons are now sufficiently energetic to cause the scintillator to emit flashes of light (cathodoluminescence), which are conducted to a photomultiplier outside the SEM column via a light pipe and a window in the wall of the specimen chamber. The amplified electrical signal output by the photomultiplier is displayed as a two-dimensional intensity distribution that can be viewed and photographed on an analogue video display, or subjected to analog-to-digital conversion and displayed and saved as a digital image. This process relies on a raster-scanned primary beam. The brightness of the signal depends on the number of secondary electrons reaching the detector. If the beam enters the sample perpendicular to the surface, then the activated region is uniform about the axis of the beam and a certain number of electrons "escape" from within the sample. As the angle of incidence increases, the interaction volume increases and the "escape" distance of one side of the beam decreases, resulting in more secondary electrons being emitted from the sample. Thus steep surfaces and edges tend to be brighter than flat surfaces, which results in images with a well-defined, three-dimensional appearance. Using the signal of secondary electrons image resolution less than 0.5 nm is possible.
It is important for a firm to reach out to consumers and create a two-way communication model, as digital marketing allows consumers to give back feed back to the firm on a community based site or straight directly to the firm via email.[24] Firms should seek this long term communication relationship by using multiple forms of channels and using promotional strategies related to their target consumer as well as word-of mouth marketing.[24]
He is the co-founder of Neil Patel Digital. The Wall Street Journal calls him a top influencer on the web, Forbes says he is one of the top 10 marketers, and Entrepreneur Magazine says he created one of the 100 most brilliant companies. Neil is a New York Times bestselling author and was recognized as a top 100 entrepreneur under the age of 30 by President Obama and a top 100 entrepreneur under the age of 35 by the United Nations.
A video illustrating a typical practical magnification range of a scanning electron microscope designed for biological specimens. The video starts at 25x, about 6 mm across the whole field of view, and zooms in to 12000×, about 12 μm across the whole field of view. The spherical objects are glass beads with a diameter of 10 μm, similar in diameter to a red blood cell.

Instead, place a laptop below the eye-line of the camera. Break the script into short paragraphs and record it section by section until you capture a great take of each. If you plan in advance when the final video will show b-roll (supplementary footage or screenshots), you can have your talent read those lines directly off the laptop like a voice over.

Search engine marketing’s greatest strength is that it offers advertisers the opportunity to put their ads in front of motivated customers who are ready to buy at the precise moment they’re ready to make a purchase. No other advertising medium can do this, which is why search engine marketing is so effective and such an amazingly powerful way to grow your business.


Video Marketing is a good way to promote your business. However, it’s not that an easy task and sometimes you need a help from your co-workers like graphic designers if you don’t know how to create or draw your own icon or image to be used in the video. Though you can get from free stock photos and icons sites to compile it for your video, I think it’s better if you create your own.

The most common imaging mode collects low-energy (<50 eV) secondary electrons that are ejected from the k-shell of the specimen atoms by inelastic scattering interactions with beam electrons. Due to their low energy, these electrons originate within a few nanometers from the sample surface.[14] The electrons are detected by an Everhart-Thornley detector,[29] which is a type of scintillator-photomultiplier system. The secondary electrons are first collected by attracting them towards an electrically biased grid at about +400 V, and then further accelerated towards a phosphor or scintillator positively biased to about +2,000 V. The accelerated secondary electrons are now sufficiently energetic to cause the scintillator to emit flashes of light (cathodoluminescence), which are conducted to a photomultiplier outside the SEM column via a light pipe and a window in the wall of the specimen chamber. The amplified electrical signal output by the photomultiplier is displayed as a two-dimensional intensity distribution that can be viewed and photographed on an analogue video display, or subjected to analog-to-digital conversion and displayed and saved as a digital image. This process relies on a raster-scanned primary beam. The brightness of the signal depends on the number of secondary electrons reaching the detector. If the beam enters the sample perpendicular to the surface, then the activated region is uniform about the axis of the beam and a certain number of electrons "escape" from within the sample. As the angle of incidence increases, the interaction volume increases and the "escape" distance of one side of the beam decreases, resulting in more secondary electrons being emitted from the sample. Thus steep surfaces and edges tend to be brighter than flat surfaces, which results in images with a well-defined, three-dimensional appearance. Using the signal of secondary electrons image resolution less than 0.5 nm is possible.


Collaborative Environment: A collaborative environment can be set up between the organization, the technology service provider, and the digital agencies to optimize effort, resource sharing, reusability and communications.[36] Additionally, organizations are inviting their customers to help them better understand how to service them. This source of data is called User Generated Content. Much of this is acquired via company websites where the organization invites people to share ideas that are then evaluated by other users of the site. The most popular ideas are evaluated and implemented in some form. Using this method of acquiring data and developing new products can foster the organizations relationship with their customer as well as spawn ideas that would otherwise be overlooked. UGC is low-cost advertising as it is directly from the consumers and can save advertising costs for the organisation. https://m.youtube.com/watch?v=7bNPg8UbhaE&feature=youtube_gdata


Search engine marketing, or SEM, is one of the most effective ways to grow your business in an increasingly competitive marketplace. With millions of businesses out there all vying for the same eyeballs, it’s never been more important to advertise online, and search engine marketing is the most effective way to promote your products and grow your business.
To prevent users from linking to one version of a URL and others linking to a different version (this could split the reputation of that content between the URLs), focus on using and referring to one URL in the structure and internal linking of your pages. If you do find that people are accessing the same content through multiple URLs, setting up a 301 redirect32 from non-preferred URLs to the dominant URL is a good solution for this. You may also use canonical URL or use the rel="canonical"33 link element if you cannot redirect.
With video content marketing, businesses find that certain metrics used to determine the success of web campaigns improve drastically. Dwell time is the most obvious, as engaging video content will likely keep visitors around for longer. 57 percent of retail brands said they notice average order values increase when users watch just one video they’ve produced and sales totals double when people have watched 10 or more videos.
Google’s Accelerated Mobile Project (AMP) will gain even more popularity. AMP is a collaboration between developers and other industry professionals to create a massive open source library that offers users more opportunity to create quick and smooth mobile-friendly web pages. This is one area where we’ll be seeing the death of slow-loading pages that rank low. The use of AMP has resulted in huge increases in mobile searches and traffic from major publications such as the Washington Post and Slate. http://m.www.youtube.com/watch?feature=player_embedded&v=7bNPg8UbhaE
The exact settings on your camera will depend on your model, but there’s likely an auto option, a bunch of presets (daylight, cloudy, tungsten, etc.), and custom. Avoid auto white balance at all costs and opt for a preset or custom instead. If you have a top-of-the-line DSLR, there may also be an option to manually set the color temperature of the room, measured in Kelvin.
As a common example, secondary electron and backscattered electron detectors are superimposed and a color is assigned to each of the images captured by each detector,[46][47] with an end result of a combined color image where colors are related to the density of the components. This method is known as density-dependent color SEM (DDC-SEM). Micrographs produced by DDC-SEM retain topographical information, which is better captured by the secondary electrons detector and combine it to the information about density, obtained by the backscattered electron detector.[48][49]
This broad overview of each piece of the Internet marketing world gives students a firm foundation in the field to help them decide where their interests and talents fit the best. All designers should have an understanding of content creation, while all content specialists should have respect for the design process (See also Content Marketing Specialist). At the more advanced levels of a marketing program, students will hone the skills that are most important to their areas of emerging expertise to create sharp minds and strong portfolios on their way to the workplace.

Native on-platform analytics, including Facebook’s Insights, Twitter’s Analytics, and Instagram’s Insights. These platforms can help you evaluate your on-platform metrics such as likes, shares, retweets, comments, and direct messages. With this information, you can evaluate the effectiveness of your community-building efforts and your audience’s interest in your content. http://m.youtube.com/e/7bNPg8UbhaE
×